MENU+86-0371-67989006 Email:[email protected]No.1 Fuel Dispenser Manufacturer and Fuel Dispensing Equipment of China Market

how to reversed and reduce the meter of fuel dispensers from 382127.65 to 378853.45

Quick inquiry
I am interested in . This equipment will be used in (country) . My name is , my Email is , my phone number is . Detailed requirements are . Please send me detailed quotation list!

fuel pump test reversing polarity? Yahoo Answers

fuel pump test reversing polarity? Yahoo Answers

  i want to test both in tank pumps on my ford econoline van (dual tanks). I have two low pumps inside the tanks and one hi pump on the frame rail. What I want to do is first take the external pump and run wires to the electric connectors REVERSED (meaning placing the neg wire of a batt to the pos of the pump and pos of batt to neg of pump) to unstick it.

Adapting mismatched fuel gauge and sending unit

Adapting mismatched fuel gauge and sending unit

increase it. (You also REDUCE the current going through the sending unit since some of it is shunted through the resistor). Now, resistances in series add. So you could take a 20 ohm resistor, put it in series. Then, when the sending unit is at 10 ohms, the meter sees 30 ohms. And when the sending unit is at 73 ohms, the meter sees 103 ohms.

Will my fuel tank empty if I leave the fuel lines

Will my fuel tank empty if I leave the fuel lines

Will my fuel tank empty if I leave the fuel lines disconnected? Not to mention the fuel would probably need to get through some filters and pumps too. The fuel in the pipes might evaporate which might mean you will need to let the fuel pump build pressure first and in rare cases you may need to prime the system but I think you will be fine

Fuel gauge doesn't read correctly when fuel gets to 1/4

Fuel gauge doesn't read correctly when fuel gets to 1/4

  Fuel gauge doesn't read correctly when fuel gets to 1/4 left. It'll drop all the way down to empty even know it has fuel.

Xflo Fuel Meter Wayne Fueling Systems

Xflo Fuel Meter Wayne Fueling Systems

Engineered for easy retrofit in existing fuel dispensers or available as an option in new Wayne dispensers, the Xflo Meter is easy to incorporate into your forecourt. Through the combination of fuel savings and lower maintenance costs, it can pay for itself in a short period of time.

The GM Fuel Gauge PMystery 1965 & Newer

The GM Fuel Gauge PMystery 1965 & Newer

The GM Fuel Gauge PMystery 1965 & Newer Diagnosing a problem with a GM fuel gauge or sending unit can be very frustrating and part of this frustration comes from not knowing the theory behind what makes that little needle swing back and forth in your dash or console. And, there are a lot of enthusiasts out there who are deathly afraid of the